Wireless Telemetry and Advanced Data Recording for Planes/Helis
FIND OUT WHAT’S HAPPENING
UP THERE!
NEW: now you can connect the Seagull to the data port of your Spektrum AR9000(TM) or JR R921 Receiver to display and set alarms on live RF Link performance data! Purchase the AR9000(TM) cable below.
You’ve got a lot invested in your RC Plane, Heli
or High Powered rocket. Whether you fly nitro, electric,
or gas, with our Flight Data Acquisition products, you
can stop guessing about your bird’s performance
and condition, and find out what’s happening up
there, either after the flight or wireless in real time! Simple
to set up and operate, our complete systems install easily
to provide data at your fingertips!
All hardware and software is included to monitor airspeed,
altitude, RPM, one temperature, 4 servo channel movements
and glitches, and receiver battery voltage. All parameters are available on the Wireless Dashboard, including programmable beep alarms for altitude, airspeed, temperature, RPM, etc.
Need our top of the line, Pro flight equipment? Click here.
Have a High Powered Rocket and need data? Click here. NEW: HP Rocket version available below!
We offer two key flight products:
Our Seagull Wirelesss Dashboard system
provides up to 20 parameters of data from your model LIVE,
conveniently displayed on the scrollable pages of our
LCD Data Dashboard. And, audible beeps can be easily programmed
for high or low alarm values on the data, letting you
set alarms for critical system parameters, like low battery,
high temp, stall speed, high RPM, and so much more!
And now you can add our micro GPS expander module (below)
to the system, which gives you in-flight and recorded
position, course, ground speed, GPS altitude, distance
to pilot, UTC, and more, in addition to all the other
Seagull features. With the combination of Seagull and
GPS, you’ll never lose another plane or rocket in
the weeds! Just go to the last position displayed on the
dashboard (using a cheap hand-held or other GPS unit)
and your plane will be there! Also, software to chart
out your flight in 3D is included free!
NEW - Multiple Engine/Multiple Sensor Support! Whether you fly electric, gas or nitro, our fully expandable systems make it easy to completely instrument multi-engine planes, or to add lots of channels of Temperature, Voltage, Current, A/D, etc. Click here for more information!
NEW - Google Earth (TM) Real time and Recorded GPS support! Unleash the power of our Flight systems with the powerful visualization capabilities of Google Earth! Our software now supports live data feed to Google Earth, as well as exporting of recorded data to the Google Earth format!
Note that the Dashboard system also includes the below
Flight Data Recorder for in-flight logging.
Our USB Flight Data Recorder system is
perfect for those who only need to see their data after
the flight, but not in real time. The tiny onboard unit
records up to 16 channels of data from your model, and
comes with Windows software for flight download, playback
and graphing.
Read through the specifications below,
read the reviews on the Reviews page, and compare our
products any other R/C telemetry or recording system on
the market. We offer the best specs, the friendliest user
experience, and the lowest cost, by far!
Seagull Wireless Flight Dashboard
System Features
Includes Recorder with features described in the
righthand column
Operates at 900MHz spread spectrum (FCC certified
version) or 433MHz (EU version – check local
regulations)
FCC version has 200 mWatt output power for one+
mile range (probably much more) – compare this
to the very low power output of other systems on the
market.
Fully compatible with all known flight RC radios
– no need to replace your existing electronics.
Onboard components weigh only an ounce or two (depending
on model and accessories), TOTAL. Other systems weigh
much more.
Small self-contained LCD Telemetry receiver attaches
simply to your radio, or is monitored by your pit
crew. No laptop needed at field!
On-board components are powered from your receiver
battery – other systems require heavy, cumbersome
batteries to worry about.
65536 unique transmission IDs (programmable) means
collision problems are extremely unlikely at your
site.
Fully programmable audible alerts can be set on
data parameters.
Dashboard is a USB peripheral: plug the receiver
into your laptop while to get full screen live display
and unlimited recording on your laptop!
Seagull Wireless Dashboard Flight System, 900 MHz, 200mW (US FCC Approved, up to 1.2 Miles Range with included Wire Antennas) Includes Flight Recorder below. (SEA-FLIGHT-900)
$369.99
Seagull Wireless Dashboard Flight System, 2.4 GHz, 100mW (Worldwide Use, FCC/CE Approved, up to 3Km Range with included wire antennas) includes Flight Recorder below. (SEA-FLIGHT-24-02)
$519.99
Seagull Wireless Dashboard Flight System, 433 MHz, 10mW (European Version, CE Approved, 10mW TX Power, up to 1000 meters range with included wire antennas) Includes Flight Recorder below. (SEA-FLIGHT-433)
$435.39
Dashboard SMA Antenna Upgrade - We install an SMA Jack and supply a Rubber Antenna of the correct frequency, which replaces the standard thin-wire Antenn on the Dashboard. Required for our Yagi antenna in the Accessories section below. Click here for photo. (SMA-UPG)
$59.99
Seagull 900 MHz Transmitter - if you want to add wireless telemetry to multiple planes not flying at the same time, only one dashboard is needed. Purchase the Seagull Flight System for the first plane, and purchase the Recorder above and the transmitter for the remaining planes. (FCC 900 MHz version) (SEA-TX-900)
NEW: Google Earth Realtime and Recorded data interface!!
Note: Click here for info on using more than one of the same Expander!
NEW:Video OSD Expander (ETS-OSD)
Fly withvideo? The Eagle Tree OSD Expander provides easy to display real time data over your existing video link. Click here for details.
Preorder: ships approximately 15 July
Price: 44.99
NEW: Brushless Motor RPM Sensor Tiny sensor measures RPM by simply connecting a wire from one of your brushless electric motor leads to the sensor. This connection is just a tap (not inline) which simplifies installation.
NEW: 5Hz GPS Expander Module (GPS-5HZ) New Smaller, faster, and more sensitive GPS Expander Module plugs into the system to provide live and/or recorded lat/lon, ground speed,
GPS altitude, distance to pilot, course, UTC timestamp, and
more. Integrated display/3D graphing software
included in data system. WAAS and EGNOS compatible, 5Hz update rate, built-in patch antenna. Click
Here to view Instruction Manual
5Hz GPS: $149.99
NEW:Spektrum/JR(TM) Interface Cable (CAB-SPEK) Now use your Seagull to see and set audible alarms on Spektrum/JR Rx holds/failsafes, lost frames, and antenna fades (up to 4 antennas) on your Wireless Dashboard display, and log the data for later review!
Connects between your RX's "Flight Log" data port and the Flight Recorder's GPS port. Use a servo Y cable to use your FlightLog display simultaneously! NOTE: make sure your RX has the data port before ordering. Click
Here to view Instruction Manual
Price: $4.99
External Active Antenna for GPS Expander Module (GPS-ANT) This tiny external antenna is great if you need to mount your GPS Expander under carbon fiber, or in other "RF challenging" locations. The Expander will pick between the strongest of the two signals (from the built-in antenna or this External Antenna) which can improve reception if your model is upside down, etc. Includes cable with MMCX jack. NOTE: if you have our older GPS module (not GPS-5HZ) please check to make sure it has the gold MMCX connector protruding from the red heatrhrink.
Price: $24.99
Electric Expander - 100 Amp (ELEC-EXP-100)
Measures motor battery pack current and voltage.
Electric Expander Specifications:
Pack Voltage: 0 to 50V
Pack Current: 0 to 100 Amps, in approx 50 mA increments Click
here to view Instruction Manual (PDF)
Click here for info on using more than one Electric Expander at the same time.
Price: $39.99
Electric Expander - 140 Amp (ELEC-EXP-140) Measures motor battery pack current and voltage.
Electric Expander Specifications:
Pack Voltage: 0 to 50V
Pack Current: 0 to 140 Amps, in approx 70mA increments Click
here to view Instruction Manual (PDF)
Click here for info on using more than one Electric Expander at the same time.
Price: $59.99
Electric Expander - 300 Amp (ELEC-EXP-300) Measures motor battery pack current and voltage.
Electric Expander Specifications:
Pack Current: 0 to 300 Amps, in approx 150 mA increments
Pack Voltage: 0 to 50V Click
here to view Instruction Manual (PDF)
Click here for info on using more than one Electric Expander at the same time.
Price $129.99
NEW: Servo Current Logger(SERVO-CURR-LOG)
Find out how much current one or more of your servos or other low current devices are drawing. Plugs into your Recorder and servo (or receiver battery/BEC) to log current from 0-5 Amps continuous, with 0.01 Amp resolution.
Price: $24.99
High Voltage Measurement Option - 70 Volts (HIGH-VOLT-OPT) This option increases your recorder measurement cabability to 70V, when used with one of our Electric Expanders below.
When this option is selected with your Recorder or Seagull order, we will modify the Recorder for this option. Or, if you have already purchased your Recorder/Seagull, the Recorder must be returned to us to have this option implemented.
Price: $69.99
Dual Channel A/D Input Board (DUAL-AD) Add your own analog sensors! Expander adds two channels of high resolution Analog to Digital to the System,
with up to 15 bit resolution.
Click
here to view Instruction Manual (PDF)
Click here for info on using more than one Dual A/D Expander at the same time.
Price: $99.99
Thermocouple Expander with Exhaust Gas Probe (THERM-EXP-EGT)
Thermocouple Expander supports two type K thermocouple probes. Includes
EGT thermocouple probe with compression fitting, for measuring up to 2000 degrees F. Click
to view Instruction Manual (PDF)
Click here for info on using more than one Thermocouple Expander at the same time.
Price: $89.99
Thermocouple Expander with CHT Probe Kit (THERM-EXP-CHT) Thermocouple Expander supports two two type K thermocouple probes. Includes CHT probe kit for
use with OS #8 and 10mm plugs. Click
to view Instruction Manual (PDF)
Click here for info on using more than one Thermocouple Expander at the same time.
Price $89.99
Exhaust Gas Temperature Thermocouple Probe Kit (TEMP-EGT) Requires our Thermocouple Expander Board above. Up to two Thermocouple probes can be plugged into the Expander simultaneously.
Price $29.99
Cylinder Head Temperature Thermocouple Probe Kit (TEMP-RINGS) CHT probe kit for use with OS #8 and 10mm plugs.
Requires our Thermocouple Expander Board above. Up to two Thermocouple probes can be plugged into the Expander simultaneously.
Micro Temp Sensor (TEMP-MICRO) Perfect for measuring temps of batteries and ESC’s.250
degrees F max temp.
Price: $9.99
NEW: High Gain 900 MHz Yagi Antenna for Dashboard(YAGI-9DBI)
Wireless link range can be doubled, tripled or more with our 9dBi directional Yagi antenna. Includes 18" coax cable with SMA connector. Antenna is 19.6" (0.5m) long, and weighs 1.5 lbs (0.7kg) with removable mounting bracket.
NOTE: requires "SMA Connector" option on dashboard - order above.
Price: $129.99
NEW:RCA to Servo Connector Adapter Cable for OSD Expander
Useful if your video equipment uses RCA plugs. Two are needed if both your camera and video transmitter use RCA.
Preorder - ships approximately 15-July
Price: $9.99
Battery Backup Harness (CAB-BAT-BACK)
Lets you power your system from a separate backup battery (4.8v - 6v) if your primary pack dips below about 4.4 v. Click here for instruction manual
Price $4.99
Extra Pitot Tube (PITOT-KIT-STD)
Price: $4.99
RPM or Temperature Extension Cable (CAB-RPM-EXT)
12” (30 cm) 3 pin extension cable for our RPM and Temperature sensors