Got video?  

Do you fly, drive or boat with FPV, or do aerial photography? We’re pleased to introduce the Eagle Tree OSD Pro.   The OSD Pro displays all the key information about your model’s status, and has many advanced features such as voice alerts, high resolution raster graphics, a new “RADAR” synthetic map, “Return to Home,” Artifical Horizon display, Acoustic Variometer, and waypoints within visual range.  

And now, you can couple the OSD Pro with our EagleEyes FPV ground station, for antenna tracking, receiver diversity, AV distribution, and telemetry to your PC or notebook.

I'm just looking for a simple, easy to use OSD. Is this one right for me?

The OSD Pro has many features and options that you may not need right away. But, why pay the same price or more for another OSD that doesn't offer these features, when you can just leave them disabled with the OSD Pro, until you need them?

Click here to read the Quick Start Guide, which is a "Basic Setup" overview showing how easy it is to configure the OSD Pro for basic features.

How it Works

The OSD Pro is a powerful, modular, fully configurable Video/Audio On-Screen Display (OSD) device, providing graphics, voice announcements, alarms, acoustic variometer with total energy compensation, Home Arrow, Return to Home, Failsafe, “RADAR”, waypoints, a flight simulator for testing, and many other features.  The information displayed can be as simple or advanced as you like, depending on how you configure the display, and on which optional Eagle Tree sensors are connected.

Do I need a video camera, video transmitter, video receiver, and goggles/display for the OSD Pro?

Yes. Eagle Tree does not sell these video products, but several of our dealers do. Here are some recommendations for dealers of these video products (listed in alphabetical order):

* DPCAV
New: click here for a full FPV/OSD Pro package from DPCAV!
*electronicarc.com
*ENDURANCE RC
*FUTURE HOBBIES
*Globe Flight Germany
*HOBBY WIRELESS
New: click here for a plug & play FPV package from Hobby Wireless!
*Mongrel Gear
*NG Hobbies
*ReadyMade RC

Flying on the beach from Mike Downey on Vimeo.

What Data Parameters can be Displayed on the OSD Pro?

All parameters available with our eLogger V3 and Data Recorders + optional sensors will be supported for display on the OSD Pro.   Here are some examples:

• GPS Parameters (Distance to Home, Home Arrow, GPS Altitude, Ground Speed,Course, and more)
• Electrical Parameters (Pack Volts, Amperage, RX Volts, Servo Current, Milliamp-Hours, Watts)
• Performance Parameters (Airspeed, Barometric Altitude,  Climbrate, Variometer,Temperatures, RPM, G-Force, EGT, Jet ECU Status, servo positions)
• Receiver Health (Dropped Frames, Antenna Fades, Missed Packets – requires Spektrum or JR FlightLog compatible Receiver)
• Call Sign, and many more

Tell me About the Advanced Features of the OSD Pro!

The OSD PRO advanced features include "RADAR," Artifical Horizon, Voice Alerts, Return to Home,failsafe, and Waypoints, with other features and modules on the way! To read more details about these advanced features, please see the instruction manual here.

RADAR

The plane icon labeled “RADAR” above serves two purposes: the direction the icon is pointingindicates your present course.   And, the location of the icon on the screen provides a synthetic map, similar to RADAR:  the center of the screen marks the takeoff point, in a "bird's eye" view, and the plane icon moves around the screen indicating your model’s location. The maximum distance and the “up” direction is configurable.

Voice Alerts

Imagine hearing the status of your model through earbuds connected to your video receiver!  The OSD Pro fully supports voice warnings and status updates, via theaudio channel of your video transmitter.   Most of the available parameters can be programmed to provide voice alerts.  

For example, you can program the OSD Pro to periodically update you on altitude once a minute: “Altitude 3-9-1 Feet”.   And, you can also program a low voltage warning “WARNING- Voltage 12-point-5 Volts”.    Voice alerts can be combined with your camera’s microphone, so you do not lose motor or other flight sounds when there are no alerts.   

Acoustic Variometer

Do you fly FPV sailplanes? A varying tone Variometer with Total Energy Compensation (completely configurable from the on-screen menus) is included. Any of our altimeters, or GPS altitude, will work with the variometer. But, the altimeters built into our Glide and Pro recorders have very high resolution, which is required for the variometer to be useful in finding thermals. You'd use the recorder instead of our eLogger as the 'data collector' if you need thermal sniffing capability. The OSD-Pro will work with either one.

Here is a video demonstration of the features of the Acoustic Variometer:

Return to Home and Failsafe

The Return To Home feature will attempt to bring your stable fixed wing or elevon/vtail plane in a “holding pattern” above the takeoff point if radio signal is lost, by manipulating your model’s rudder/ailerons, elevator (or elevons), and throttle, based on your settings.   GPS and other sensor information is used to attempt to return the plane to home.  

Here's a video showing Return to Home in action:

Note that this feature requires configuration of several parameters via our on-screen menus. An on-screen Return to Home configuration wizard is built in to simplify this process. The feature may require “trial and error” testing, and may not work with all planes or under all conditions. If you have a stabilization system, this process is greatly simplified. We plan on releasing additional sensors that will further simplify this feature.

A Failsafe feature is also included, if Return to Home is not desired, or you are not using GPS.  The failsafe feature sets your aileron/rudder, throttle, and elevator to programmable positions, if radio signal is lost.  This is most useful for radios without built-in failsafe.

The Return to Home and Failsafe features work with all known radio types.

Flight Simulator

A built-in flight simulator is included, letting you fly the RADAR icon around the screen, controlling altitude, throttle and turns with your RC Radio. Since the control surfaces of your model will move at the same time, this feature makes it easier to configure Return to Home and test your alarms and settings, and is also fun on rainy days!

Waypoints

Up to 3 waypoints (within visual range of the takeoff point) can be programmed into the OSD Pro, for aerial photography or just for fun.   The locations of the waypoints are displayed on the RADAR display, making it easy for you to manually fly to the waypoints (the system will not autonomously fly to the waypoints).

New: Artifical Horizon Display

When you connect the FMA Direct™ CPD-4™ X/Y horizon sensor (either with our without the FMA™ stabilization Computer), an artifical horizon line can be displayed on the video screen. Click here for information on how to connect the FMA Direct sensor to the OSD Pro system. Click here for this information in Russian (thanks to Oleg, Syberian)! See the video below for an example of the AHI display tracking the horizon:

New: RSSI

Several long range radio systems support analog RSSI output. We now support RSSI display, directly on the OSD Pro screen. Click here for more information.

New: Monitoring of Multiple Batteries

Need to monitor more than one battery pack with your OSD Pro, such as your video battery, main battery, and BEC? We now support monitoring of up to three battery packs, directly on the OSD Pro screen. Click here for more information.

How Do I Configure and Control the OSD Pro?

The OSD Pro's built in on-screen menus and Eagle Tree’s drag and drop configuration software makes it easy to configure the OSD Pro to display what you want to see, when and where you want to see it. As few or as many parameters as you need can be displayed.

Our software lets you configure the OSD with up to 20 data parameters per screen.  Also, the same parameter can be displayed on multiple screens.

The OSD Pro's on-screen menus let you set up the Return to Home feature, set audio volume, configure GPS settings, turn on and off the graphical features, and much more, without needing a computer at the field.

Two servo channels (one of which must be dedicated full time to the OSD Pro) let you switch between on-screen menus to further configue the OSD, or turn off the OSD entirely.

How Do I Hook it Up?

The OSD Pro Expander has the following connections:

• Connection to the eLogger or Data Recorder
• Servo-style connections to your camera’s “video out” port and your videotransmitter’s “video-in” port
• Servo-style connections to your audio microphone (if you have one) and to your video transmitter's audio in port.
• Servo connections for controlling the OSD from your radio, and for Return to Home and Failsafe features. The servo connections are Aileron/Rudder In and Out, Elevator In and Out, Throttle In and Out, Aux 1 In, and Aux 2 In. Note that the Aux 1 channel must be dedicated to the OSD Pro, but the Aux 2 channel may be shared with other functions on your model.
• Five male to male Servo extension cables are included for hooking up to your servos.

Is the Eagle Tree OSD Pro System “Future Proof”?

Yes!   Eagle Tree has been in the R/C Data business for many years – it’s all we do!   We won’t lose interest in your data equipment shortly after you buy our product, and we have full time support staff to help with any issues you encounter.

Also, our systems are fully modular.  If we come out with a new sensor, a more powerful OSD Expander, a software improvement, etc., it’s easy and cost effective to update the system.   So, your system is not obsolete a few months after your buy it.

And of course, the OSD Expander’s firmware is updatable from the internet, making it easy for you get support for new sensors, access to new features, and download the inevitable bug fixes.

But I also need Data Logging!

Complete data logging of most parameters is included.  The data are downloaded via the included USB connection, and graphed and analyzed with our powerful Windows software.

I Need more Information about the OSD Pro!

Click above for a video of the Eagle Tree OSD Pro in action! Thanks to "Reckless Bill!"

Click here to read the OSD Pro Manual (PDF).

Click here to email us with questions about the OSD Pro.

Click here to view a "very active" online forum discussion of our new OSD Pro.

Нажмите здесь, чтобы читать OSD Pro Руководство (спасибо Олег!).

Interested in our lower cost, Text-based Standard OSD? Click here.

I want to Order a Complete OSD Pro Package now!

You can order your OSD-Pro from your favorite Eagle Tree dealer, or order direct from us if you don't have a dealer near you.

The packages below include everything you need to display and log Altitude, Speed, Home Arrow, Distance, GPS Position, Current, Voltage, milliAmp-Hours, Wattage, and more on your existing video system (does not include video camera or video transmitter!). The package also includes voice alerts, and the advanced OSD Pro features.

The package includes the eLogger V3 of your choice, the OSD Pro Expander, and 10Hz GPS Expander.

There are 3 packages available below. The only difference among the packages is your choice of the 100 amp eLogger with integrated connnectors, the 100 amp eLogger with wire leads, or the 150 amp eLogger with heavy duty wire leads.

OSD Pro Pkg with 100A eLogger/Integrated Connectors and GPS
$239.97 (OSDPRO-PKG-CN2)

OSD Pro Pkg with 100A eLogger/Wire Leads and GPS
$239.97 (OSDPRO-PKG-LD2)

OSD Pro Pkg with 150A eLogger/Wire Leads and GPS
$259.97 (OSDPRO-PKG-HD2)

I already have an eLogger V3 or Recorder, and want the OSD Pro!

You can order the OSD Pro Expander separately. Don't forget that you need an eLogger V3 or Data Recorder to use the OSD Expander. Note also that a GPS Expander is needed for several of the OSD Pro's advanced features.

OSD Pro Expander
$89.99 (ETS-OSD-PRO)

I want even more sensors for my OSD Pro!

Need even more sensors, such as a barometric altimeter, an airspeed sensor, or an RPM sensor?

Add them by clicking here and scrolling down to the "accessories" section! All of the accessories for our eLoggers will work with the OSD Pro.

Here are a few additional accessories:

Male RCA to Servo Connector Adaptor Cable

Useful if your video equipment uses RCA plugs. Two are needed if both your camera and video transmitter use RCA. Also can be used for audio if your video transmitter's audio in uses RCA.

$9.99

Snap-on Ferrite Choke (CHOKE-FERRITE)
Useful for suppressing RF from noisy video camera transmitters, that can interfere with GPS reception. Weight 0.4 oz. One will snap around several adjacent cables.

$5.99 (CHOKE-FERRITE)